12 ACS 300 User’s Manual
Chapter 2 - Mechanical Installation
If multiple units are installed adjacent to or above each other, the
following minimum distances apply:
• Units side by side, clearance 12 mm
• Units above each other, clearance 300 mm
Figure 2-2 ACS 300 Dimensional drawing.
Mounting
Mounting the ACS 300
To ensure proper cooling and safe installation, check that the
mounting surface is relatively flat and that there are no openings
allowing entrance to the back of the unit. The maximum size of
the fixing screws for ACS 300 units is M6 (1/4”), except for frame
size R2 it is M5.
To Next Page
Loading...
