ABB ACS 600 MultiDrive - Chapter 5 - Commissioning the Drive Section

ACS 600 MultiDrive – Technical Data
A-2 ACS 600 MultiDrive
Supply Section Tables
The following tables specify the ratings for the supply sections. For
IGBT supply section ratings see ACA 635 IGBT Supply Sections
User’s Manual (EN code 64013700).
Notes The notes concerning the supply section tables are listed below.
P
loss
P
loss
is the heat loss of a unit with basic options.
Noise Level Noise level applies to echoless room.
Height Cabinet height is 2072 mm for IP 54R classification.
Weight/Width Bottom and top entry weights in the following tables apply to units with
basic options and aluminium DC busbars. Width (EMC) is the width of
the EMC filter cabinet, Weight (EMC) is the additional weight due to
the EMC filter cabinet.
An auxiliary control unit is included in every ACS 600 MultiDrive
delivery. The following tables do not include the width and weight of the
auxiliary control unit: 400 mm (approximately 170 kg) or 600 mm
(approximately 190 kg).