Marine Applications – Technical Data
B-2 ACS 600 MultiDrive
Applicable Standards
The ACS 600 MultiDrive for marine applications complies with the
following standards:
• IEC 60092-302: 1997 Electrical installations in ships, low voltage
switchgear and controlgear assemblies.
• EN 60204-1: 1992 + Corr. 1993 (IEC 204-1). Safety of machinery.
Electrical equipment of machines. Part 1: General requirements.
• EN 60529: 1991 (IEC 529), IEC 664-1: 1992. Degrees of protection
provided by enclosures (IP code).
• EN 50178: 1986. Electronic equipment for use in power
installations.
• EN 61800-3 (1996): EMC product standard including specific test
methods.
Materials
Other Technical Data
See chapter ACS 600 MultiDrive – Technical Data. The data for
ACS 600 MultiDrive applies also to marine applications if specific data
is not included in this chapter.
Enclosure
Coating
Thickness
Colour
Hot-dip zinc coated steel sheet 1.0 to 2,5 mm with
polyester thermosetting powder coating (only in
visible parts)
60 mm RAL 7035 light beige semigloss
Flat Busbars
Tin plated copper
Package
Wood or plywood (seaworthy package). Plastic covering of the package: PE-LD, bands PP or steel.
To Next Page
Loading...
