ABB ACS 607 - Page 47

Appendix A – ACS/ACC/ACP 604/607 Technical Data
ACS/ACC/ACP 604/607 Drives ACx=ACS/ACC/ACP A-9
1)
The maximum acceptable size of the cable is 3x120+70 (3x(AWG 0000) + AWG 00); cross-
sectional areas of copper conductors in mm
2
, 3 x phase conductor + Ground PE conductor).
Aluminium cable cannot be connected due to cable lug size.
2)
This is the Grounding terminal for the Ground PE bus and the frame of the ACx 604 module. The
terminal is to be connected to the Ground PE bus of the cabinet the module is installed in.
3)
Cable size: 6 AWG...300 MCM
4)
Isolated Stud terminal
ACx 604-0260-3/0320-5/0320-6 1x(10-240)
4)
1x(10-240)
4)
22/30 3x(12-240) 3x(12-240) 33/44 M10 (2 pcs)
2)
22/
30
-
(R9)
ACx 604-0320-3/0400-5/0400-6 1x(10-240)
4)
1x(10-240)
4)
22/30 3x(12-240) 3x(12-240) 33/44 M10 (2 pcs)
2)
22/
30