3.2 Using a dremel tool cut the power and fault indicator extension
tab approximately a 3/16” from the cover surface.
Original Modified
4 Modify Mxxx-01 (MPOW-01, MREL-01, MTAC-01) for UL
Type 4X drive mounting.
4.1 Using a screw driver release the four securing tabs and then
remove the top cover.
Author: Jeff Fell – Application Eng., Greg Semrow – Product
Marketing Date: 8, 2014
External
http://www.abb.us/drives.
Industry – Industrial
Document #: LVD-EOTN72U-EN
Revision: A
Product Categories: ACS355, MPOW, MREL, MTAC
To Next Page
Loading...
Need help?
General
