6 Control Panel Access Option & Reassemble
6.1 Option 1 – Built-In Control Panel – Disconnected
Note: Option 1 will require removing the ACS355’s UL Type 4x front cover to
connect the drives control panel.
7 Place cover and gasket on ACS355 UL Type 4X drive
and tighten the four fastening screws. Procedure is
complete.
7.1
Option 2 – Blank Control Panel -
Note: Option 2 will require removing the control panel access cover to connect
Author: Jeff Fell – Application Eng., Greg Semrow – Product
Marketing Date: 8, 2014
External
http://www.abb.us/drives.
Industry – Industrial
Document #: LVD-EOTN72U-EN
Revision: A
Product Categories: ACS355, MPOW, MREL, MTAC
To Next Page
Loading...
