ABB ACS355 - Applicability; Target Audience; Purpose of the Manual

8 Introduction to the supplement
Following chapters please refer to ACS355 user’s manual (3AUA0000066143
[English]):
• Operation principle and hardware description
• Mechanical installation
• Planning the electrical installation
• Electrical installation
• Installation checklist
• Control panels
• Application macros
• Startup, control with I/O and ID run
• Fieldbus control with fieldbus adapter
• Fault tracing
• Maintenance and hardware diagnostics
• Technical data
• Appendixes
Applicability
The manual is applicable to the ACS355 high speed program firmware version 6303
or later. See parameter 3301 FIRMWARE. Option code +N826 in the drive type code
shows that the drive has the high speed program installed.
Target audience
This supplement is intended for people who work with ACS355 high speed program.
The reader of this supplement is expected to know the fundamentals of electricity,
wiring, electrical components and electrical schematic symbols.
Purpose of the manual
This manual provides information needed for commissioning, operating and
maintaining the ACS355 high speed program.