Technical data 119
Cable Entries
Input, motor and brake resistor cable terminal sizes (per phase) and tightening
torques are given below. Two-hole 1/2-inch diameter cable lugs can be used.
Dimensions, weights and noise
Hheight
W1 width of the basic unit with PE terminal (bookshelf)
W2 width with the cable connection terminal plates on the left side only (bookshelf)
D depth without fastening brackets
(R7 bookshelf: depth with fastening brackets is 20.32 in.)
(R8 bookshelf: depth with fastening brackets is 22.48 mm)
Package dimensions and weights
Fram
e size
Max. cable U1, V1, W1, U2, V2, W2, UDC+/R+,
UDC-, R-
Earthing PE
Screw Tightening
torque
Screw Tightening
torque
kcmil/AWG lbf ft lbf ft
R7 2 × 250 MCM 1/2 37...55 3/8 22...32
R8 3 × 700 MCM 1/2 37...55 3/8 22...32
Frame size UL type: open chassis Weight Noise
Height W1 W2 Depth
in. in. in. in. lb dB
R7 44.13 13.15 16.36 18.31 220 71
R8 61.57 16.35 22.14 22.36 441 72
Frame size ACS800-U4 ACS800-04M
Height Width Depth Weight Height Width Depth Weight
in. in. in. lb in. in. in. lb
R7 23 49 22 55 33 49 22 68
R8 24 67 26 68 33 67 26 88
To Next Page
Loading...
