ABB ACS800-04 - Replacing the Fan (R8)

94 Maintenance
 Replacing the fan (R8)
1. Remove the front cover.
2. Disconnect the fan capacitor and power supply wires.
3. Remove the red fastening screws of the plastic side cover of the fan. Shift the
cover to the right to free its right-hand edge and lift the cover off.
4. Remove the red fastening screws of the fan.
5. Lift the fan out of the cabinet.
6. Install the new fan and fan capacitor in reverse order to the above.
5
4
4
2
2
3
3