ABB ACS850-04 - Mounting the Control Unit Horizontally on a DIN Rail; Mounting the External Control Unit Vertically on a DIN Rail

Installation
100
Mounting the external control unit vertically on a DIN rail
1. Fasten the latch (A) to the back of the control unit with three screws.
2. Click the control unit to the rail as shown below (B).
Mounting the control unit horizontally on a DIN rail
1. Fasten the latches (A) to the back of the control unit with three screws.
2. Click the control unit to the rail as shown below (B).
3aua0000038989
A
A
B
B
3aua0000038989
A
A
B
B