Installation
89
Mounting the drive module into the cabinet
WARNING! Follow the safety instructions, page 14. Ignoring the instructions can
cause physical injury or death, or damage to the equipment.
Handle the drive module carefully. Make sure that the module does not fall down
when moving it on the floor and during installation and maintenance work: Open the
support legs by pressing each leg a little down and turning it aside (1, 2). When ever
possible secure the module also with chains from top.
Do not tilt the drive module (A). It is heavy (over 160 kg [350 lb]) and its center of
gravity is high. The module will overturn from a sideways tilt of 5 degrees. Do not
leave the module unattended on a sloping floor.
To Next Page
Loading...
