Parameter settings
Contents of this chapter
This chapter contains the parameters that you must set in the FSO module and the drive.
Competence
The person who configures the safety functions in the FSO module must be a competent
person as required by IEC 61508-1 clause 6. In this context, the person must have expertise
and knowledge of functional safety, the safety functions and the configuration of the FSO
module. ABB has training courses on the FSO module.
FSO module parameter settings
The default parameter values shown below are example values for the safety functions
described in this manual. Actual parameter values of the delivery can be different. Always
make sure that:
• the parameter settings agree with the circuit diagrams, and
• the design agrees with the safety requirements of the application.
You must use the Drive composer pro PC tool to set the FSO module parameters. You also
need a password to download the configuration to the FSO module from Drive composer
pro. For the default password of the FSO module, see the FSO module user’s manual. For
more information on Drive composer pro, see Drive composer start-up and maintenance
PC tool user's manual (3AUA0000094606 [English]).
Note: When the motor is running, you cannot change the password, adjust parameter
values, or upload or download the FSO configuration file.
5
Parameter settings 37
To Next Page
Loading...
