ABB ACS880-17 - Compliance with the European Machinery Directive

NameStandard
Functional safety of electrical/electronic/programmable electronic safety-related systems
- Part 2: Requirements for electrical/electronic/programmable electronic safety-related
systems
IEC 61508-2:2010
Functional safety – Safety instrumented systems for the process industry sector – Part
1: Framework, definitions, system, hardware and application programming requirements
IEC 61511-1:2016
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements –
Functional
EN 61800-5-2:2007
IEC 61800-5-2:2016
Safety of machinery – Functional safety of safety-related electrical, electronic and pro-
grammable electronic control systems
EN 62061:2005
+ AC:2010
+ A1:2013
+ A2:2015
IEC 62061:2015 Ed.
1.2
European Machinery Directive2006/42/EC
Machine-specific C-type standardsOther
Compliance with the European Machinery Directive
The drive is an electronic product which is covered by the European Low Voltage Directive.
However, the drive internal safety function of this manual is in the scope of the Machinery
Directive as a safety component. This function complies with European harmonized standards
such as IEC/EN 61800-5-2. The declaration of conformity is delivered with the drive.
64 Technical data