ABB ACS880-204LC - IEC Busbar Shim Kits; Main Circuit Breaker and Wagon Cover

Content of the 115 V wagons:
1SDA079698R1 (E2.2-A W FP 2000)
• W FP Iu=2000 3p HR HR UL /
W FP Iu=2500 3p HR HR UL /
WAGON W FP Iu=5000 HR HR UL
1SDA079700R1 (E4.2-A W FP 2500)
1SDA079706R1 (E6.2-A W FP 5000)
1SDA080373R1
• AUP 5 contacts 400V E2.2...E6.2 - left set
The exception is E4.2_W_FP_3200_HR-HR_IEC:
1SDA073913R1 (E4.2 W FP 3200)
• W FP Iu=3200 HR HR, IEC
1SDA073764R1
• AUP 5 contacts 400V E2.2...E6.2, IEC
For adapting E2.2S-A, E4.2S-A and E6.2V-A air circuit breakers to IEC bus bars, use bus
bar shim kit. See IEC busbar shim kits (page 150).
IEC busbar shim kits
The following shim kits are available for adapting E2.2S-A and E4.2S-A main circuit breakers
to IEC busbars.
IllustrationOrdering codeDataType
Instruction code: 3AXD50000286072
3AXD50000286324
EMAX2 E2.2 busbar
shim kit
E2.2S-A
Instruction code: 3AXD50000286973
3AXD50000286782
EMAX2 E4.2 busbar
shim kit
E4.2S-A
Main circuit breaker and wagon cover
One cover is needed for each main circuit breaker/wagon pair. See ACS880 multidrive
modules cabinet design and construction instructions (3AUA0000107668 [English]) for
further details regarding arc protection.
IEC: IP54 flange, key N.20005 E2.2…E6.2, 1SDA073869R1, ordering code:
3AXD50000049760
150 Ordering information