Type designation key
￭ IGBT supply module
Type designation describes the composition of the module in short. Note that in the type
designation label of an IGBT supply module (ACS880-204LC), the type of the module is
ACS880-104LC. The complete designation code is divided in subcodes:
• The first 1…20 digits form the basic code. It describes the basic construction of the unit.
The fields in the basic code are separated by hyphens.
• The plus codes follow the basic code. Each plus code starts with an identifying letter
(common for the whole product series), followed by descriptive digits. The plus codes
are separated by plus signs.
The following table lists the fields of basic code ACS880-204LC-0400A-7 as an example,
and the plus codes of the IGBT supply module.
DESCRIPTIONCODE
Basic codes
Product seriesACS880
Construction: liquid-cooled IGBT supply module104LC
Size
Refer to section Ratings (page 182).
0400A
Voltage range
Input voltage range: 525…690 V. This is indicated in type designation label as typical input voltage
levels (3~ 525/600/690 V AC).
7
Plus codes
For the plus codes, see chapter Ordering information.
Internal du/dt filters (When the module is used as an IGBT supply module, it must always be ordered
with +E205.)
E205
￭ LCL filter
DESCRIPTIONCODE
Basic codes
LCL filter for frame R8i IGBT supply moduleBLCL
Size
Refer to chapter Technical data.
15LC,
24LC or
25LC
Voltage range
Voltage rating: 525…690 V. This is indicated in type designation label as typical input voltage levels
(3~ 525/600/690 V AC, 600 UL, CSA).
7
30 Operation principle and hardware description
To Next Page
Loading...
