ABB AMTD-1 P - Page 8

4
Digital instruments
AMTD-1-R P / AMTD-2-R P
1
2
3
Full scale setting [A]
Minimum alarm threshold [A]
Maximum alarm threshold [A]
Alarm tripping delay [sec.]
Alarm cutout hysteresis [%]
Alarm output configuration
Reset min and max values
AA
> 3 sec.
A
> 3 sec.
1 Press and hold the button for at least 3 seconds until the display flashes.
2 Press the button repeatedly until the indication of the parameter to set
appears.
3 Press and hold the button for at least 3 seconds to select the required
full scale.
1. Adjustments and settings
EN