CL settings
200
1SVC 440 795 M0100
X Press OK to enter the password entry menu.
X Press OK to move to the 4-digit entry field.
X Four zeros will be displayed
X Modify the four password digits using the cursor buttons.
X Confirm with OK.
Press ESC to exit the security area.
Delete
Use number combination 000000 to delete a password.
If a password has not been entered already, the logic relay
will show four XXXX.
Password incorrect or no longer known
If you no longer know the exact password, you can try to re-
enter the password several times.
Have you entered an incorrect password?
X Re-enter the password.
After the fourth entry attempt the logic relay will ask
whether you wish to delete the circuit diagram and data.
X Press
– ESC: Circuit diagram, data or password are not deleted.
– OK: Circuit diagram, data and password are deleted.
The logic relay will return to the status display.
ENTER PASSW
XXXX
ENTER PASSW
1789
ENTER PASSW
0000
h
The DELETE FUNCT function has not been deactivated.
ENTER PASSW
XXXX
DELETE ?
h
If you no longer know the exact password, you can press
OK to unlock the protected logic relay. The saved circuit
diagram and all function relay parameters will be lost.
To Next Page
Loading...
Need help?
General
