Need help?Do you have a question about the ABB CL-LMR 18AC2 Series and is the answer not in the manual?
General| Rated Voltage | 250 V AC |
|---|---|
| Category | Relays |
| Output | 2 c/o (SPDT) contacts |
| Terminal Type | Screw Terminal |
| Contact Configuration | 2 c/o (SPDT) contacts |
| Electrical Life | 100, 000 operations |
| Mechanical Life | 10, 000, 000 operations |
Highlights crucial safety rules to prevent electrical hazards during installation.
Explains the procedures for connecting AC and DC power supplies to the logic relay.
Guides on wiring various types of digital and analog inputs to the logic relay.
Explains how to connect relay and transistor outputs to loads like contactors and motors.
Offers a step-by-step guide to wiring and creating a basic CL circuit diagram.
Explains the use of analog comparators for threshold switching and comparing input values.
Covers setting up password protection for unauthorized access to the logic relay.
Explains how actual values and settings are retained after power loss or device reset.
Details how to monitor outputs for short-circuits or overloads using internal inputs.
Introduces the PC software for creating, storing, test and managing CL circuit diagrams.
Provides troubleshooting steps for common issues encountered during circuit diagram creation and operation.
Contains comprehensive technical specifications covering environmental, mechanical, and electrical data.
To Next Page
