—
For your safety!
4 CONVAC VACUUM CONTACTOR INSTALLATION AND OPERATION INSTRUCTION
Please read this manual carefully before installing
and using contactor
• Contactor should only be installed indoors
where electrical equipment is suitable for work
• Ensure that installation, operation and
maintenance are carried out by dedicated
electricians
• Must ensure the connection conditions of the
electrical equipment on site and the application
of the working procedures with security
• All operations related to contactor shall comply
with the relevant provisions in the manual
Attention！
Pay special attention to the notes marked
with this danger sign in the manual.
• Do not exceed the load specified in the technical
parameters of the contactor under normal
operating conditions
• The manual should be placed within easy reach
of all personnel involved in installation,
operation and maintenance
• User's full-time personnel shall be responsible
for all matters affecting job safety and properly
manage contactor
Warning！
• Always comply with the provisions of the
installation manual and safety operating
instructions
• high voltage hazard
• Dangerous voltage may cause electric shock and
fire
• Power must be cut off before performing any
work on the equipment
To Next Page
