ABB CP1484 - USB Interfaces (IF4 and IF5); Slots for Interface Modules

18
CP1484, CP1485, CP1486, CP3484, CP3485, CP3486
Data sheet V 1.00
1.1.13 USB interfaces (IF4 and IF5)
IF4 and IF5 are USB interfaces. The connection is made using a USB 1.1 interface.
The USB interfaces can only be used for devices which have been released by B&R (e.g. floppy
disk drive, DiskOnKey or dongle).
1.1.14 Slots for interface modules
The CPUs are equipped with one or three slots for interface modules.
The X20 system can be connected to various bus or network systems by selecting the
appropriate interface modules.
Figure 10: X20 CPUs - USB interfaces (IF4 and IF5)
Information:
The USB interfaces cannot be used as online communication interfaces.