ABB DATUM L160

19
4 CONFIGURATION MODE…
…4.3.1 Hardware Assignment and Input Type – Fig. 4.2
Fig. 4.2 Hardware Configuration and Input/Output Ranges
Display
0 xxxx
1 xxx . x
2 xx . xx
3 x . xxx
4 x . xxxx
Display Relay 1 Relay 2* Relay 3* Logic Output Analog Output
50Hz 60Hz Source Source Source Source Source
1AAlarm 1 Alarm 2 Alarm 3 IPFAIL ML
2bAlarm 1 Alarm 2 Alarm 3 IPFAIL ML average
U Custom Custom Custom Custom Custom
A 1200
A – Hardware Configuration
ML = Measured level IPFAIL = Measured level failure
* only available if the appropriate option board is fitted
b 1200
B – Input Type and Range Configuration
C 1200
D – Process Variable
Display Decimal
Places
d 1200
C – Not Applicable
Display
2 4 to 20 mA
8 1 to 10mA (P851, P861 sensor)
U Custom configuration