ABB DATUM L160

25
K 0000
J 0000
L 0000
n 0000
P0000
4 CONFIGURATION MODE…
4.3.3 Operator Functions – Fig. 4.7
'JKLN' Settings
The first character (J, K, L or N) identifies the
parameter to be changed (indicated by a flashing
letter). Available parameter options are shown in Fig.
4.7 below.
J = Not applicable
K = Not applicable
L = Operator Level frame enable
n = Operator Level math reset enable
Note. For custom settings contact the local
distributor.
Continued on page 26.
Fig. 4.7 Operator Level Maths Reset Enable
Parameter Max./Min. Average Volume
Setting
0 ✗✗✗
1 ✗✗✓
2 ✗✓✗
3 ✗✓✓
4 ✓✗✗
5 ✓✗✓
6 ✓✓✗
7 ✓ ✓ ✓
Parameter Max/Min./Average
Setting
0 ✗
1 ✓
L 0000
n 0000