18
LEVEL3
b 1200
A 1200
C 1200
d 1200
E 1203
…4 CONFIGURATION MODE
4.2 Accessing the Configuration Mode
To access the Configuration Mode, enter the correct configuration code in
Level 1 – see Sections 2.2 to 2.4. The Configuration password is set up in Level 4.
4.3 Basic Hardware and Indicator Functions (Level 3)
4.3.1 Hardware Assignment and Input Type – Fig. 4.2
Level 3
Note. To select this frame from anywhere in this
level, press and hold the
key for a few seconds.
'ABCD' Settings
The first character (A, B, C or D) identifies the
parameter to be changed. The current setting is
indicated by a flashing letter. Parameter options are
shown in Fig. 4.2.
A = Hardware configuration
b = Input type and range
C = Not applicable
d = No. of decimal points
Note. For custom settings, contact the local
distributor.
Continued on page 20.
To Next Page
Loading...
