ABB DATUM L160 - GETTING STARTED; Displays and Controls Overview; Operator Mode Overview; Set Up Mode Overview

1
GETTING STARTED
Displays and Controls
• Displays and function keys
• LED indication
• Error messages
Operator Mode (Level 1)
• Operator menus for:
– Standard level indicator
– Maximum/minimum/average level indicator
– Level indicator with volume indication
Set Up Mode (Level 2)
• Alarm trip points
• Alarm hysteresis levels
Configuration Mode (Levels 3 and 4)
• Accessing the configuration levels
• Level 3
– Hardware assignment and input type
– Alarm types and hysteresis
– Operator functions
– Digital input and serial communications
• Level 4
– Ranges and passwords
Installation
• Siting
• Mounting
• Electrical connections
8
Symbol Identification and Section Contents
This manual is divided into five sections which contain all the information needed to
install, configure, commission and operate the DATUM L160. Each section is
identified clearly by a symbol as shown below.