ABB DCS880 - Technical Data and Control Circuit Layout; Control Circuit Terminals (SDCS-CON-H01); Control Cable Wire Size and Torque

15
Technical data
3ADW000480R0101 DCS880 Quick guide e a
Technical data
Control circuit terminals on the SDCS-CON-H01
The control circuit terminals are common for all sizes H1 … H8.
Location of the control circuit board SDCS-CON-H01
The SDCS-CON-H01 is mounted on an electronic tray. The electronic tray is attached in the housing by means
of two hinges.
Recommended wire size - Tightening torques
Control cables:
Wire sizes:
Tightening torques:
0.5 … 2.5 mm2 (24 … 12 AWG)
0.5 Nm (5 lbf·in) for both stranded and solid wiring