Need help?Do you have a question about the ABB DCS880 and is the answer not in the manual?
General| Control Type | Digital |
|---|---|
| Voltage Range | Up to 1200 V DC |
| Control Principle | Field-oriented control |
| Field Supply | Integrated |
| Communication Protocols | CANopen |
| Cooling | Air |
| Protection Class | IP00, IP20, IP21, IP54 |
| Protection Features | Overvoltage, overtemperature, short circuit, earth fault |
| Rated Voltage | 230 to 1200 V DC |
| Supply Voltage | 380 ... 690 V AC |
| Input Voltage Range | 230 to 690 V AC |
| Control Mode | Speed, Torque |
Details essential safety precautions for installation and maintenance tasks.
Provides instructions and warnings for proper grounding procedures to ensure safety.
Guidelines for safe and proper physical installation of the drive unit.
Safety warnings and instructions related to the operation of the drive.
Tables showing current and power ratings for 2-Q and 4-Q converters by unit type.
Wiring diagram for H1-H4 converters using an OnBoard field exciter.
Recommended wire sizes and tightening torques for armature connections.
Identification of control circuit terminals common to all H1-H8 sizes.
Specifications for control cable wire sizes and recommended tightening torques.
Detailed layout of internal 24 VDC and external 24 VDC control circuit terminals.
Detailed explanation of Home view pages, signal display, customization, and navigation.
Lists common user tasks like starting, stopping, parameter management, and fault handling.
Tasks related to viewing, editing, and managing drive parameters.
Procedures for viewing, hiding, and resetting drive faults and warnings.
Essential checks to perform before applying power to the thyristor power controller.
Steps for powering on the controller and verifying initial operation and settings.
Lists and describes various parameter groups for drive configuration and settings.
Configuration of fault levels, external events, and signal supervision functions.
Settings for motor thermal protection and configuration for fieldbus adapters.
Configuration for DCSLink communication and motor data settings.
Details on main control word sources and used control word bits.
To Next Page
