23
PC-tool “Drive composer entry”
3ADW000480R0101 DCS880 Quick guide e a
The Driver software for the device is installed at given COM port
First time connect the PC-tool to the Drive
1. Connect your PC to the Assistant control panel with a USB cable.
The following text appears on the Assistant control panel screen: “USB connected”.
Note: The Assistant control panel cannot be used when it is connected to a PC.
2. Launch Drive composer by double-clicking Drive composer entry.exe
3. Select the COM port that your Assistant control panel is using.
This question is asked only when the program is launched for the first time. If you want
to change the COM port settings, go to View
→ Settings in Drive composer.
To Next Page
Loading...
