Need help?Do you have a question about the ABB DCS880 series and is the answer not in the manual?
General| Cooling Method | Air-cooled, liquid-cooled |
|---|---|
| Control Type | Direct Torque Control (DTC) |
| Communication Protocols | Ethernet, Modbus RTU, Modbus TCP, PROFIBUS DP, PROFINET, EtherCAT |
| Protection Class | IP00, IP21, IP54 |
| Safety | STO (Safe Torque Off) |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature |
| Ambient Temperature | -20 to +55 °C (derating may apply) |
| Input Voltage | 3-phase, 380-830 V AC |
How to check the received drive for damage and completeness.
Guidelines for installing the drive unit in its final location.
Overview of available product documentation and manuals.
Details on system requirements for accessing the virtual CD.
How to generate start, stop, and run commands via various sources.
How to control mains contactor and monitor drive/motor fan status.
Detailed explanation of the Off2 and Off3 stop functions and their sequence.
Guide to using the control panel's setup assistants for commissioning.
Overview of the basic Drive composer entry tool.
Features of the professional Drive composer pro software.
Key parameters for optimizing control loops.
To Next Page
