ABB DCS880 - Common User Tasks; Parameter Management; Faults and Warnings Handling

19
Using the control panel
3ADW000480R0101 DCS880 Quick guide e a
Common user tasks
This following tables list common user tasks and describe how to complete them.
See Functions in the main Menu and Functions in the Options menu for detailed descriptions of functions in the
menus.
Basic operation of the drive
Task
Actions
Start and stop the drive.
In local control, press to start the drive and to stop the drive.
Set the reference (for example, speed) in the Home view.
In local control, go to Options > Reference.
Set the reference with the arrow keys.
Switch between local and remote control.
Press REM/LOC
Parameters
Task
Actions
Choose parameters displayed on the Favorites list.
Go to Menu > Parameters > Favorites > Edit.
View/edit parameters.
Go to Menu > Parameters to view parameters.
Move by arrow keys and save using left soft key.
View parameters that differ from Application Macro defaults.
Go to Menu > Parameters > Modified.
System information and help
Task
Actions
How to get help.
Press to open the context-sensitive help.
View control panel version.
Go to Menu > System info > Control panel.
View drive information.
Go to Menu > System info > Drive.
Faults and warnings
Task
Actions
Hide/view an active fault.
Faults are automatically displayed. If you hide a fault by pressing
(Hide), it automatically reappears after 60 seconds of no key
presses.
You can also view the fault through Options > Fault status.
Open help page on a fault.
Press to view the help page.
Reset an active fault.
Press (Reset) to reset an active fault.
View tripping faults.
Go to Menu > Event log > Primary faults.
Hide/view an active warning.
Warnings are automatically displayed. If you hide a warning by
pressing (Hide), it automatically reappears if the warning is still
active after 60 seconds of no key presses.
Open help page on a warning.
Press (How to fix) or to view the help page.
Reset an active warning.
Warnings disappear automatically once the condition that has
triggered it goes away.
View past warnings and faults.
Go to Menu > Event log > Other events.
Basic settings and assistants
Task
Actions
Change language.
Go to Menu > Settings > Language.
Change time and date, and related settings.
Go to Menu > Settings > Date & time.
Launch an assistant.
Go to Menu > Assistants and select an assistant to launch.
Backups
Task
Actions
Create a backup.
Creates an backup of firmware parameters to the panel.
Restore a backup.
Restores a backup to the firmware parameters of DCT880. It is
mandatory to set the unit in local mode before.