ABB Emax 2 IEC 60947 - M-PACT Plus;M-PACT G VS EMAX 2 Door Cut-outs

(20)
30
3P & 4P
- Disassemble the flange of the old circuit-breaker.
31
Position the adhesive template on the door and make sure that desired
edges perfectly matches the respective existing door cutout edges.
Match E4.2 Edge
with existing Door Cutout
For Emax4.2 4P
Match Edge
with existing Door Cutout
5N
For Emax2.2 3P
Match Edge
with existing Door Cutout
For Emax2.2 4P
5P
Match E4.2 Edge
with existing Door Cutout
For Emax4.2 3P
5Q
M-PACT Plus/M-PACT G VS EMAX 2 Door Cut out Details