ABB Emax 2 IEC 60947 - Page 22

(22)
34
Cut the door along the hatched red line and drill in the positions marked by the red holes
For Emax2.2 3P
For Emax2.2 4P
For Emax4.2 3P
For Emax4.2 4P
- Use hardware from Emax 1.2 door flange kit
For Emax2.2 3P & Emax4.2 3P
35
5L
5M
For Emax2.2 4P & Emax4.2 4P
M-PACT Plus/M-PACT G VS EMAX 2 Door Cut out Details