ABB IN THE RAILWAYS – MEDIUM VOLTAGE PRODUCTS
13
ABB IN THE RAILWAYS – MEDIUM VOLTAGE PRODUCTS
13
1VSR630206EN – en – EDO-D0002852– Instruction manual – 2021.10 Design and specification are subject to change without notice
IMPORTANT!
The apparatus is susceptible to blows, in
particular if equiped with ceramic insulators
Your local ABB Agent
(Address on the last page)
5.2. Transport
The apparatus and components may only be
suitable means of transportation. Shocks and
impacts, penetration of dust, liquids and moisture
are to be prevented.
To lift or move the apparatus, one should proceed
dimensions, please refer to a later chapter.
5.3. Goods Acceptance and Visual
Inspection
After delivery of the component, it is
recommended to carry out a visual inspection of
the correctness of the component
for damages
plates, the identification numbers and the
quantity of components supplied.
With subsequent longer storage, the original
protect the apparatus against environmental
influences.
5.4. Handling of transport damage
In case of ABB being responsible for transport, the
customer is required to report any damage in
within 7 days of receipt of the
goods.
Damage reports are to be directed to the
To Next Page
Loading...
