PRODUCT FAMILY: FSK II + - OPERATING AND MAINTENANCE MANUAL12 PRODUCT FAMILY: FSK II + - OPERATING AND MAINTENANCE MANUAL 12
1VSR630206EN – en – EDO-D0002852– Instruction manual – 2021.10 Design and specification are subject to change without notice
—
5. Transport & Storage
On delivery of the apparatus, its condition is to be
examined for transport damage. If a defect is
observed (including damaged packaging), the
manufacturer is to be informed immediately.
The apparatus is delivered in a vertical or
horizontal position on a Euro pallet or in a special
transport crate. With vertical transport, the
insulators are protected by a protective cover.
IMPORTANT!
During storage, the apparatus, accessories
and spare parts must remain in their original
packaging
The apparatus must be transported with
vacuum interrupter contacts in the open
position
5.1. Storage
Ensure that the apparatus, accessories and spare
parts are stored in a dry and clean place,
protected against atmospheric influences such as
dust, direct sunlight, humidity and condensation,
>30°C / 24h), long storage duration (>3month) and
presence of humidity, the resistances (in pole and
control box) must be supplied to prevent
condensation.
5.1.1. Apparatus Storage Temperatures
commissioning, completely bring the apparatus to
operating environment conditions (temperature
and humidity).
5.1.2. Orientation
The apparatus has to be stored in the original
packing and position.
5.1.3. MABS Control Card and Capacitors
Designation Value
Period of storage
procedure
Capacitors
resistance, then discharge.
MABS Control Card
Storage temperature
Relative humidity
condensation)
To Next Page
Loading...
