ABB HT576667 - Page 129

Operation Manual / 4 Product description / A100-M axial
Tables
© Copyright 2017 ABB. All rights reserved. HZTL4033_DE Revision B December 2017
Tables
Table1: Related documents .......................................... 3
Table2: Weight of the turbocharger .......................... 8
Table3: Foot bolt dimensions .................................... 14
Table4: Clamping screw tightening torques .......... 17
Table5: Oil pressure range.......................................... 21
Table6: Oil temperature at the inlet ......................... 22
Table7: Oil temperature at the outlet....................... 22
Table8: Expected replacement intervals ................. 32
Table9: Recommended replacement intervals....... 32
Table10: Tightening torque (81272)......................... 35
Table11: Tightening torque (81273) ......................... 35
Table12: Compressor cleaning parameters ........... 39
Table13: Cleaning parameters Wet cleaning of tur-
bine and nozzle ring..................................................... 44
Table14: Malfunctions when starting – Delayed
start-up .......................................................................... 45
Table15: Malfunctions when starting – Vibrations 45
Table16: Malfunctions when starting – Rubbing of
rotating parts................................................................ 45
Table17: Malfunctions during operation – Lubricat-
ing oil pressure too low............................................... 46
Table18: Malfunctions during operation – Drop in
speed .............................................................................. 46
Table19: Malfunctions during operation – Speed in-
creases ........................................................................... 46
Table20: Malfunctions when stopping – Runout
noises.............................................................................. 47
Table21: Malfunctions when stopping – Shortened
runout time.................................................................... 47
Table22: Malfunction, No speed measurement sig-
nal or poor signal amplitude...................................... 48
Table23: Malfunction, Measured speed too high.. 48
Table24: Malfunction, Measured speed too low ... 48
Table25: Assembly weights ........................................ 51
Table26: Tightening torque (27027) ........................ 52
Table27: Tightening torque (27027)......................... 53
Table28: Axial clearance ............................................. 54
Table29: Tightening torque (56014) ......................... 66
Table30: Tightening torque (57005)......................... 67
Table31: Tightening torque (61069).......................... 68
Table32: Tightening torque (61059 / 42128 / 86505)
70
Table33: Inner thread size (25008)............................. 71
Table34: Tightening torque (25013).......................... 72
Table35: Tightening torque (61037 / 61090) .......... 74
Table36: Tightening torque (77015).......................... 75
Table37: Tightening torque (72011) .......................... 77
Table38: Axial clearance .............................................. 78
Table39: Tightening torque (56014 / 61009).......... 81
Table40: Tightening torques...................................... 83
Table41: Tightening torques 61009 .......................... 84
Table42: Locking device tightening torque............. 87
Table43: Cover plate dimensions 1 ........................... 89
Table44: Cover plate dimensions 2........................... 89
Table45: Cover plate dimensions 3 ........................... 89
Table46: Customer spare part set (97070) ............. 95
Table47: Turbocharger with part numbers ............. 97
Page 99 / 99Page 99 / 99