Operation Manual / 4 Product description / A100-M axial
2 Removal and installation / 2.1 Turbocharger weight
© Copyright 2017 ABB. All rights reserved. HZTL4033_DE Revision B December 2017
2 Removal and installation
2.1 Turbocharger weight
Lifting gear with a sufficient load limit must be used for removing and installing the tur-
bocharger. The following weight specification applies to the heaviest variant possible. De-
pending on the specification, the weight specified on the rating plate may be lower than the
standard value specified here.
Fig.5: Turbocharger suspension points
Weight of the entire turbocharger
Product Weight [kg]
A170-M 3100
A175-M 4600
Table2: Weight of the turbocharger
Page 8 / 99
To Next Page
Loading...