Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.8 Installing nozzle ring
© Copyright 2017 ABB. All rights reserved. HZTL4033_DE Revision B December 2017
8.8 Installing nozzle ring
Fig.42: Installing nozzle ring 1
1. Secure retaining plate (90338) with screws (90339) and hook in guide rod (90336).
2. Using lifting gear, position nozzle ring (56001) on guide rod (90336). Do not take strain
off lifting gear yet.
3. Fit guide plate (90328) with nuts (61037).
4. Remove the lifting gear.
5. Position nozzle ring (56001) in gas outlet casing.
Page 65 / 99
To Next Page
Loading...