GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
2.3.3 CAUTION - Also ensure that there are no loose screws or rotating parts
inside the +P1 cabinet.
Description
To avoid product damage, after servicing the +P1 High Voltage
Controller Cabinet, do not continue work until you are sure there are
no loose screws, rotating parts, or other parts inside the computer
module.
2.3.4 CAUTION – CLOSE THE CABINET DOOR
_____________________________________________________________________
Description
When the robot system performs production activities, the cabinet
doors must be closed properly. Otherwise, the cabinet will not meet
the requirements of the IP54 protection level. The degree of
protection against electromagnetic interference will also be limited.
ABB Sp. z o.o.
Side 20/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
