GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
Please ensure that the system you are commissioning is in good
technical condition! The system can only be started when all safety
devices are present and working (e.g. safety switches, safety limit
switches, etc.).
After noticing changes that are important for safety or changes in the
operation of the system, designated persons (supervisors,
maintenance) should be immediately informed.
Attention ! If you notice a dangerous situation, press the nearest
emergency stop button immediately.
Note: Failure to follow the instructions below
may result in serious accident or loss of life
and serious damage to the device and product
Table 10 Occupational health and safety symbols
To ensure safe work, all service
personnel should be familiar with
the area's operation and health
and safety instructions
Maintenance and adjustment work
should be performed by qualified
personnel.
ABB Sp. z o.o.
Side 37/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
