GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
There are 3 access levels:
1. Operator – ability to change the retooling program, visible production parameters
such as emptying mode, error reset, error preview, ability to move individual
sections in manual mode.
2. Mechanic – additionally the ability to change settings in the program,
User: mechanic
Password: moss
3. Service – additionally specific program changes such as servo limits and
adjustments that may damage the device.
Service user
Password: serv
After starting the station, operator mode is activated. To change the user, press the
LOG IN button on the main screen. To return to operator mode, log out the current
user.
Figure 6 HMI login window
● Main screen of the HMI +P0 operator panel.
ABB Sp. z o.o.
Side 47/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
