GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
Figure 8 Machine State Model screen
1. – PackML section showing the current machine status - in this section, the
current machine status is displayed in green.
2. – Recipe selection – The operator can choose from three recipes:4s the8sthe
Manual. Recipe4s concerns packing 8 dispensers in one cycle, recipe8s
concerns packing 16 dispensers in one cycle, while Manual means manual
control. If changing the recipe is allowed, use the up/down arrows to select the
desired mode and then confirm with the Enter button.
Selecting a procedure 4s raises the system of grinders that rotate the
dispensers and locks them in a safe position. Selecting a procedure8s exits the
grinder system.
If the recipe can be changed, the message "Ready to change the recipe" is
displayed.
If the operator tries to change the recipe and the current state of the machine
does not allow it, the following message will be displayed: "Recipe change not
allowed".
● EM Diagnostics screen
ABB Sp. z o.o.
Side 50/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
