GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
● Parameters
Figure 19 Parameters
The screen is only available to the "service" user. All important machine operating
parameters are displayed. Authorized persons can change these parameters even
during automatic machine operation.
In the parameters window it is possible to change the language of the HMI panel.
Three languages are available - Polish (default), English and German.
Number of robot cycles to complete production – number of robot cycles to stop the
cell
Number of robot cycles to the "EMPTY FFS1" command – number of robot cycles to
send the EMPTY command to FFS1.
1. Pressing "COMPLETE" - starts the production completion cycle
2. After two cycles, feeder "1" - does not feed dispensers, feeder "2" - does not
feed immediately (equalizing the number of dispensers on the conveyors)
3. After the specified number of robot cycles - sending the "EMPTY" command to
FFS1
4. After the specified number of robot cycles - STOP the cell
ABB Sp. z o.o.
Side 59/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
