GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
5.4 AUTOMATIC OPERATION MODE
In the automatic machine operation mode, the robot moves according to
the programmed trajectory specified for a given product.
The procedure for switching the station to automatic
operation mode is presented below
Table 16 Switching to automatic operation mode
ABB Sp. z o.o.
Side 63/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
following the starting procedure
described in the user manual.
Make sure that all steps
described in sections 5.1 and 5.3
of the manual have been
completed.
Switch the
operating mode
key
Turn the key to the left to the
AUTO position.
To Next Page
Loading...
