GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
Figure 31 Setup menu - download control (FlexPendant)
In this position, special attention should be paid to whether the tapping point is
appropriate. If not, we change the parameters on the HMI panel and then
press the buttonSo, which will move the robot by the given value.
Figure 32 Pickup Position Adjustment (HMI)
After setting the correct download position, confirm the changes by pressing
the buttonNO and we move on to the next step.
11. After confirming the download position, the following window will appear
on the FlexPendant panel:
ABB Sp. z o.o.
Side 74/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
