GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
16.After checking three sockets on a given line, the following window will
appear on the FlexPendant panel:
Figure 40 Settings menu - second line adjustment (FlexPendant)
If there is a need to adjust another line, press the buttonSo
and repeat the offset modification steps as with the previous line.
If there is no need to check subsequent placement points, the following
window will appear:
ABB Sp. z o.o.
Side 79/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
