GILLETTE ŁÓDŹ
Robotic station for packing FFS1 dispensers
4.11 BOX SETTING
The operator operating the machine must position the box as shown in the
figure below (arrows up). If the box is inserted the wrong way, the system will
prevent production from continuing and an incorrect box insertion indication
will appear (a flashing red light at the appropriate box feeder).
Figure 45 Correct positioning of the box on the feeder
Additionally, a protection has been introduced to detect a dispenser that is
turned 180° (bottom surface up). Sensors performing this function are located
above the conveyors at the exit from the feeder zone.
ABB Sp. z o.o.
Side 89/135
DTR_GILLETTE_ZSDPD_Farmores1_IRB360_2015_v03
To Next Page
Loading...
Need help?
General