Specification of Variants and Options
Product Specification S4Cplus M2000/BaseWare OS 4.0 31
2 Specification of Variants and Options
The different variants and options for the controller are described below.
The same numbers are used here as in the Specification form.
For manipulator options, see Product Specification respectively, and for software
options, see Product Specification RobotWare Options.
1 SAFETY STANDARDS
EU - Electromagnetic Compatibility
693 The controller complies with the European Union Directive “Electromagnetic
Compatibility” 89/336/EEC. This option is required by law for end users in the
European Union.
UNDERWRITERS LABORATORY
695 UL/CSA
The robot is certified by Underwriters Laboratory to comply with the Safety Standard
ANSI/UL 1740-1996 “Industrial Robots and Robotic Equipment” and
CAN/CSA Z 434-94.
UL/UR certification is required by law in some US states and Canada.
UL (UL/CSA) means certification of complete product and UR (UL recognized
Component) means certification of component or not complete product.
Safety lamp (691) Door interlock (145 or 142) Operating mode selector standard
2 modes (193) are mandatory.
Not with Cabinet height 950 mm no cover (122), Cabinet height 1200 mm (123),
Cabinet height 1750 mm (124), Cabinet variant Prepared for Arcitec (112), Mains
connection type CEE17 connector (132, 133), Service outlet type 230V Europe (412).
696 UR (UL Recognized)
The robot is certified by Underwriters Laboratory to comply with the Safety Standard
UL 1740 “Industrial Robots and Robotic Equipment”. UL/UR certification is required
by law in some US states and Canada. UL (UL listed) means certification of complete
product and UR (UL Recognized Component) means certification of component or not
complete product.
Safety lamp (691), Door interlock (145 or 142), Operating mode selector standard 2
modes (193) are mandatory.
Not with Cabinet variant Prepared for Arcitec (112), Mains connection type CEE17
connector (132, 133), Service outlet type 230V Europe (412).
To Next Page
Loading...
