[556] Arcitec
Product Specification RobotWare Options for BaseWare OS 4.0 41
[556] Arcitec
This option is intended to be used in combination with the Arcitec power sources.
It shall only be ordered by the supplying unit of Arcitec.
The package is a special software, used together with the ArcWare package, to be able
to control not only the robot program but also the set up, configuration and
programming of the power source. Thus the robot teach pendant will be used for
programming and tuning both the robot and the power source.
The package also includes a special aid for easy welding programming, i.e. the synergic
function. This means that there is a pre-programmed relationsship between the wire
feed rate and all other data components in the power source, making it easy to control
the entire welding process, just by tuning the wire feed rate.
To Next Page
Loading...
