8 Robot controller
8.0.2 Start window
158 A 3HAC 16245-1
8.0.2 Start window
When is it
shown?
xx0100000168
The start window displays the start menu and will appear in the following cases:
• When no controller operating system is installed at power on.
• After X-START (see section "X-start").
• After C-START (see section "C-start").
Possible actions From this window you can choose to do one of the following:
Restart the
system, Reboot
The BootImage will be re-executed, used to apply changes in the system settings (see section
"Reboot").
Load a system
from diskettes,
Boot Disks
(See section 4.4)
Set the network
settings, Network
Settings
Set network settings for Main Computer or check how to configure your PC (see section
"Network Settings").
Choose a system
from the mass
storage memory,
Select System
If there are one or more systems in the mass storage memory, you can choose to activate one
of them (see section "Select System).
To Next Page
Loading...
