28 M1M 20 POWER METER USER MANUAL
7.1.Unit (UNIT)
UNIT includes the following sub-menus:
Menu Description
PASS Change the existing password
RESET Full or partial reset of the meter
INFO Device information
BRT Adjust the brightness of the display
Modify password (PASS)
PWD shares the same interface and setting way with password setting. For details, see “6.1.Password for
the first use (PASS)”.
CONF UNIT PASS
Reset (RESET)
CONF UNIT RESET
If the user selects “YES” and presses Button “Enter”, all parameters will be reset, i.e. restoring all
parameters to their factory default.
RESET sub-menu includes the following pages:
Menu Description
RESET FACTORY Reset factory settings
RESET ENRG Clear energy value
RESET NOTF Clear notifications
• RESET FACTORY
Reset Factory settings restores parameters to default values, including communication parameters, input
and output, notifications, etc.
CONF UNIT RESET FACTORY
To Next Page
Loading...
