ValueDescriptionSystem option and interface
0...4This is a DA Client that is
loosely coupled to the SYS 600
base system and can therefore
be installed also in a separate
computer.
It is used to connect OPC DA
servers to SYS 600. You need
one client for each server that
is to be connected.
Note: This DA client is used
with the IEC 61850 OPC
server, but you do not have to
select this option due to the
IEC 61850 communication.
OPC DA Client /External
0...4The OPC DA client is used to
connect foreign devices to SYS
600 with the OPC DA interface.
You need one client for each
server that is to be connected.
The DA client is tightly integ-
rated with the process data-
base and run always on the
SYS 600 computer.
OPC DA Client
0...4The OPC A&E client is used to
connect foreign devices to SYS
600 by means of the OPC A&E
interface.
You need one client for each
server that is to be connected.
OPC A&E Client
Yes/NoThe SQL Export option
provides a tool and functions
for browsing the process data-
base and exporting process
data to a relational database.
The export can be done either
event based or cyclically.
SQL Export
Computer options5.3.
The SYS 600C computer options are presented in the following tables.
Table 5.3-1 Hardware
Hardware
Power Supply: 88 - 132 VAC / 45 - 160 VDC (Single or redundant)
31
SYS 600C 1.92
MicroSCADA Pro
1MRS756804
Product Guide
To Next Page
Loading...
